Mechanical pressure switches
Pressure and flow controllers
Variable speed driver
AccessoriesPressure and flow controllers BRIO TOP 2.0
Electronic digital device for electric pumps
- The digital press-flow switch. Completely new, it combines the simplicity of a pressure switch and the reliability of a pressure flow switch. The large display allows programming, easily with precision. Inside, the compartment dedicated to the capacitor makes it the ideal partner for systems with submersible pumps.
- Available with 1" or 1 1/4" connection
- Suitable with single phase motor pump up to 3Hp(16A)
- Suitable for water pumping system with pressure tank as digital pressure switch, or as flow and pressure controller
- Intarnal compartment dedicated to pump capacitor.
- Available with 1" or 1 1/4" connection
- Pressure values adjustable via digital display
- Pressure values and motor current showed on the display
- Automatic control of the start and stop functions of single phase electric pumps (surface, vertical and submersible) up to 16A (3HP)
- Protection against dry running
- Automatic reset in event of dry running.
- Motor over current control which trips in the event of overload or with the blocked rotor
- Anti-freeze protection which starts up the pump when the ambient temperature falls below 4°C
- Rotor anti-blocking function used to prevent seizure of mechanical parts during prolonged periods of pump inactivity.
- Overpressure protection able to stop the electric pump at a set threshold.
- Installation in any position -both vertical and horizontal.
- Operation in master/slave configuration into twin booster sets.
- Terminals for remote connection (1 input + 1 output)
- Alarm log for simple analysis of any system malfunction
- Severe leak protection(starts check per hour 15-30-60)
- Multilingual display with 16 characters
| Power supply: | 115-230Vac ±15% 50/60Hz |
| Max rated currant: | 16A |
| Starting pressure range( P+F mode) | 0,5-8bar |
| Pressure Range ( P+P mode) | 0,8-9bar |
| Max allawable pressure: | 10bar |
| Protection degree: | IP 65 |
| Fluid temperature: | 5oC - 45oC |
| Ambient temperature: | 5OC - 45oC |
| Hydraulic connections: | 1''M , 1''1/4M |
